您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 15064.4-1994 显象管石墨乳试验方法 附着性试验方法

时间:2024-05-10 04:37:39 来源: 标准资料网 作者:标准资料网 阅读:9681
下载地址: 点击此处下载
基本信息
标准名称:显象管石墨乳试验方法 附着性试验方法
英文名称:Method for adherence of colloidal graphite for kinescope
中标分类: 建材 >> 炭素材料 >> 石墨材料
ICS分类: 电气工程 >> 绝缘流体
替代情况:被GB/T 15064-2008代替
发布部门:国家技术监督局
发布日期:1994-04-18
实施日期:1994-01-02
首发日期:1994-04-18
作废日期:2009-04-01
主管部门:中国建筑材料工业协会
提出单位:国家建材局标准化研究所
归口单位:山东南墅石墨矿
起草单位:山东南墅石墨矿和国家建材局咸阳非金属矿研究所
起草人:刘汇东、焉在金、张有源、刘幼红
出版社:中国标准出版社
出版日期:1900-01-01
页数:2页
适用范围

本标准规定了检测显象管石墨乳附着性的试验方法。
本标准适用于测定显象管锥内涂石墨乳、管颈石墨乳、外涂石墨乳和黑白显象管内导电石墨乳、外导电石墨乳的附着性。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 建材 炭素材料 石墨材料 电气工程 绝缘流体
基本信息
标准名称:苏云金芽胞杆菌原粉
英文名称:Bacillus thuringgiensis Technical
中标分类: 化工 >> 化肥、农药 >> 农药
ICS分类: 农业 >> 杀虫剂和其他农用化工产品 >> 杀虫剂
发布部门:中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
发布日期:2004-06-22
实施日期:2004-12-01
首发日期:2004-06-22
作废日期:1900-01-01
主管部门:农业部
提出单位:中华人民共和国农业部
归口单位:中华人民共和国农业部
起草单位:农业部农药检定所、华中农业大学微生物农药国家工程研究中心
起草人:姜辉、喻子牛、陈守文、王开梅、王晓军、昊新平、顾宝根
出版社:中国标准出版社
出版日期:2004-12-01
页数:16开, 页数:12, 字数:20千字
书号:155066.1-21758
适用范围

本标准规定了苏云金芽胞杆菌原粉的要求、试验方法以及标志、标签、包装、贮运。本标准适用于防治鳞翅目害虫的苏云金芽胞杆菌原粉。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T125。极限数值的表示方法和判定方法
GB/T1600-2001农药水分测定方法
GB/T1601农药pH值的测定方法
GB/T1604商品农药验收规则
GB/T1605-2001商品农药采样方法
GB3796农药包装通则
GB/T16150-1995农药粉剂、可湿性粉剂细度测定方法

所属分类: 化工 化肥 农药 农药 农业 杀虫剂和其他农用化工产品 杀虫剂
Product Code:SAE J2651
Title:Jump Start Connections for 42 Volt Electrical Systems
Issuing Committee:Connector Systems Standards Committee
Scope:This SAE Standard defines test methods and general requirements at all phases of development, production, and field analysis of electrical terminals (including sense pins), connectors, and components that constitute the jump-start connection for road vehicles having 42 V (nominal) electrical systems. The 42 V jump start connector is always remote from the vehicle battery and may take the form of an in-line or Header Connection, either of which is in an accessible location for attachment of a jumper cable from an assist vehicle or battery charger.WARNING--The Jump Start Connector requires environmental protection. This specification assumes that such protection is in place and remains effective for the life of the vehicle. The level of protection depends on the vehicle packaging environment and duty cycle.Appendix B of this document contains the physical specification for the Jump Start Connector.